Product catalogue

Luchtcilinder

Serie: CS1

SKU: CDS1BN125-50+0-XC11

• Double acting, single rod • Bore sizes: 125mm to 300mm • Strokes up to 2400mm available • Seven mounting styles available • Auto switch capable.

Luchtcilinder

Serie: CS1

SKU: CDS1WB125-90

• Air cylinder, double acting, double rod • Bore sizes (mm): 125, 140, 160, 180, 200, 250, 300 • Mountings: basic, foot, flange, trunnion • Rod boots and cushions available • Auto switch capable for 125mm~200mm bores.

Slaglengte:

200 · 1200 · 400 · 550

Boring:

250 mm · 160 mm · 200 mm · 300 mm

Magneet:

D (Built-in)

Luchtcilinder

Serie: CS2

SKU: CDS2B180PR-1000

• Increase your machine robustness –  Up to 700N lateral load allowable • Cut your installation costs - Lightweight design thanks to the aluminium die-cast covers • Reduce your piping effort - Cushion and piping port are placed on the same side.

Luchtcilinder

Serie: CG1-Z

SKU: CG1BN20-13Z

• Reduce your maintenance labours – Clean profile design for no foreign matter accumulation • Adapt it easily to your application requirements – Wide range of variations available • Get design and mounting flexibility – Male and female rod end styles as well as various mounting brackets options can be selected.

Slaglengte:

60 · 400 mm · 180 · 150 mm

Boring:

63 mm · 40 mm · 63mm · 40mm

Magneet:

D (Built-in) · D (Built-in Magnet)

Luchtcilinder

Serie: CG1-Z

SKU: CG1BN20-25Z1

• Standard: double acting single rod • Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80, 100 • Strokes up to 1000 mm • Improved piping flexibility • Mounts: basic, foot, front or rear flange, front or rear trunnion, clevis • Auto switch capable with a variety of lead wire lengths.

Magneet:

D (Built-in Magnet)

Slaglengte:

80 · 170 · 25 · 150

Boring:

25 mm · 50 mm · 20mm · 20 mm

Luchtcilinder

Serie: CG3-Z1

SKU: CG3BN32-32Z1

• Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80, 100 • Strokes up to 300 mm • Short type construction • Rubber bumper cushion.

Slaglengte:

125 · 150 · 177 · 32

Boring:

25mm · 63mm · 50mm · 32mm

Magneet:

D (Built-in)

Luchtcilinder

Serie: CJ2-Z

SKU: CJ2B10-14SZ

• Mount it as you wish – 7 mounting types, 4 rod end brackets • Achieve precise movement – Reduced rod end deflection by mounting a wear ring to the piston as standard • Reduce your assembly and maintenance costs – Fine auto switch position adjustment just by loosening one screw.

Magneet:

D (Built-in) · D (Built-in Magnet)

Slaglengte:

154 · 68 · 25 · 100

Boring:

6 mm · 16 mm · 10 mm · 10mm

Luchtcilinder

Serie: CM2-Z1

SKU: CM2B20-25Z1

• Fit CM2 to your application requirements – big range of variations • Reduce the total length – when using female rod end and/or with boss-cut type • Improve your mounting freedom – Various mounting bracket options.

Magneet:

D (Built-in) · D (Built-in Magnet)

Slaglengte:

80 · 40 · 25 · 200

Boring:

32 mm · 32mm · 25mm · 25 mm

Luchtcilinder

Serie: CM2-Z

SKU: CM2B20-50Z

• Fit CM2 to your application requirements – big range of variations • Reduce the total length – when using female rod end and/or with boss-cut type • Improve your mounting freedom – Various mounting bracket options.

Magneet:

D (Built-in Magnet) · D (Built-in)

Slaglengte:

200 · 80 · 100 · 300

Boring:

32mm · 32 mm · 40mm · 40 mm

Luchtcilinder

Serie: CM3

SKU: CM3BZ25-25

• Double acting single rod • Bore sizes: 20, 25, 32, & 40 (mm) • Strokes from 25mm through 300mm • Mounts: basic, foot, front & rear flange, clevis, trunnion • Variety of switches and a variety of lead wire lengths

Slaglengte:

300 · 100 · 150 · 60

Boring:

25 mm · 32 mm · 40 mm · 20 mm

Magneet:

D (Built-in)

Luchtcilinder

Serie: CS1

SKU: CS1B125-150

• Double acting, single rod • Bore sizes: 125mm to 300mm • Strokes up to 2400mm available • Seven mounting styles available • Auto switch capable.

Slaglengte:

180 · 140 · 40 · 500

Boring:

125 mm · 200 mm · 300 mm · 160 mm

Magneet:

D (Built-in)

Luchtcilinder

Serie: CS1

SKU: CS1LQ125TF-100

• Double acting, single rod, low friction • Bore sizes: 125mm to 160mm • Strokes up to 1600mm available • Seven mounting styles available • Auto switch capable

Slaglengte:

600 · 200 · 100 · 450

Boring:

125 mm · 140 mm

Magneet:

D (Built-in)

Luchtcilinder

SKU: CS2B125-100

• Increase your machine robustness –  Up to 700N lateral load allowable • Cut your installation costs - Lightweight design thanks to the aluminium die-cast covers • Reduce your piping effort - Cushion and piping port are placed on the same side.

Slaglengte:

400 · 250 · 75 · 300

Boring:

180 mm · 125 mm · 140 mm · 160 mm

Magneet:

D (With auto switch) · Without auto switch · D (Built-in)

Luchtcilinder

Serie: CG1-Z

SKU: HF1A-CG1ZN40-200Z1

• Compatible with food manufacturing • Standard: double acting single rod • Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80, 100 • Strokes up to 1500 mm • Improved piping flexibility • Mounts: basic, foot, front or rear flange, front or rear trunnion, clevis • Auto switch capable with a variety of lead wire lengths.

Slaglengte:

100 · 200

Boring:

63mm · 40mm

Luchtcilinder

Serie: JCM

SKU: JCMBZ20-25F

• Round Air Cylinder, Double Acting, Single Rod. • Compact and Lightweight. • Bore sizes (mm): 20, 25, 32 and 40. • Strokes up to 300 mm. • Direct mounting on both covers is possible. • Male and female rod ends available. • Bumper cushion.

Magneet:

D (Built-in Magnet)

Slaglengte:

130 · 100 · 70 · 220

Boring:

20 mm · 32 mm · 25 mm · 40 mm

Luchtcilinder

Serie: JMB

SKU: JMDBB32TF-100

• Tie Rod Air Cylinder, Double Acting, Single Rod. • Compact and lightweight with intermediary bore sizes. • Bore sizes (mm): 32, 40, 45, 50, 56, 63, 67, 80, 85, 100. • Strokes up to 500mm. • Non-adjustable air cushion + rubber bumper.

Slaglengte:

350 · 100 · 125

Boring:

80 mm · 56 mm · 50 mm · 32 mm

Luchtcilinder

Serie: MB-Z

SKU: MBB40-20Z

• Reduce installation dimensions - Weight reduction by changing the shape of rod and head covers • Get mounting flexibility - Various mounting bracket options • Adapt it to your application - Wide range of variations available.

Magneet:

D (Built-in Magnet) · D (Built-in)

Slaglengte:

200 · 500 · 840 · 550

Boring:

125 mm · 40 mm · 50 mm · 32 mm

Luchtcilinder

Serie: MB2

SKU: MDB2B40TF-150

• Bore sizes (mm): 32, 40, 50, 63, 80, 100, 125 • Strokes up to 2700 mm • Air cushion and rubber bumper structure.

Slaglengte:

118 · 80 · 150 · 1500

Boring:

32 mm · 100 mm · 80 mm · 63 mm

Magneet:

D (Built-in Magnet)

Luchtcilinder (3 Posities)

Serie: RZQ

SKU: RZQA32-25-10

• 3 position cylinder w/intermediate stopper mechanism • 2-stage stroke enabled with a small increase in length • Repeatability in intermediate stop positioning: ¹0.02 or less • First-stage stroke can be freely specified • Wide variations in mounting

Boring:

40 mm · 32 mm · 32mm · 63 mm

Luchtcilinder (High Power)

Serie: RHC

SKU: RHCB20-100

Slaglengte:

250 · 460 · 700 · 180

Boring:

32 mm · 20 mm · 50 mm · 40 mm

Luchtcilinder (High Power)

Serie: RHC

SKU: RHCB32-250-XC93

Slaglengte:

250 · 835 · 490 · 400

Boring:

Ø32 mm · Ø40 mm

Luchtcilinder (Longer Life)

Serie: CG1-Z

SKU: CG1BN20-40Z1-XC4A

• High durability • Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80, 100 • Strokes up to 1000 mm.

Slaglengte:

40 · 300 · 100 · 250

Boring:

20 mm · 63 mm · 40 mm · 80 mm

Magneet:

D (Built-in Magnet)

Luchtcilinder (Metal Seal)

Serie: MQM

SKU: MQMLD6-30D

• Lateral Load Resisting Cylinder, Low Friction • Bore sizes: 10, 16, 20, 25, 32, 40 mm • High speed/frequency version available • Long service life of 10,000 km for 100 million full cycles.

Slaglengte:

90 · 35 · 25 · 60

Boring:

16 mm · 20 mm · 25 mm · 10 mm

Luchtcilinder (Metal Seal)

Serie: MQQ

SKU: MQQTB10-25D

• Low friction, metal seal cylinders. • Bore sizes: 10, 16, 20, 25, 30, 40mm. • Available in a lateral load resisting type. • Long service life of 10,000 km for 100 million full cycles.

Slaglengte:

50 · 100 · 60 · 25

Boring:

30 mm · 40 mm · 25 mm · 20 mm

Luchtcilinder (Rvs)

Serie: CG5

SKU: CG5BN20SR-25

• Use it in food, beverage and medical equipment – Non-toxic additives • Prevent water from entering the cylinder – Special scraper • Extend the life of the product – The cylinder can be disassembled to replace seals.

Slaglengte:

30 · 900 · 80 · 25

Boring:

25mm · 32mm · 50 mm · 32 mm

Magneet:

D (Built-in)

Luchtcilinder (Rvs)

Serie: CG5

SKU: CJ5B10SR-5

• Use it in food, beverage and medical equipment – Non-toxic additives • Prevent water from entering the cylinder – Special scraper • Extend the life of the product – The cylinder can be disassembled to replace seals.

Magneet:

D (Built-in Magnet) · D (Built-in)

Slaglengte:

140 · 20 · 40 · 80

Boring:

16 mm · 20mm · 25mm · 10 mm

Luchtcilinder (Slede Type)

Serie: MXH2

SKU: MXH2B6-10-XC3A

• Boost your machine performance – High-precision linear guide • Reach long distances – Stroke up to 150 mm • Get lightweight machines – Weight as low as 61 g for the smallest size.

Slaglengte:

10 · 50 · 100 · 20

Boring:

6 mm · 25 mm · 10 mm · 16 mm

Luchtcilinder (Slede Type)

Serie: MXH-Z

SKU: MXH6-15Z-XC3B

• This product is being discontinued and will be replaced by MXH2 series. Update details here . • Bore sizes: 6, 10, 16, 20 mm • Special (non-standard) porting option • Rubber bumpers • RoHS compliant • Auto switch capable.

Slaglengte:

20 mm · 35 mm · 30 mm · 10 mm

Boring:

16 mm · 10 mm · 6 mm · 20 mm

Luchtcilinder (Slede Type)

Serie: MXP

SKU: MXP8-10N

• Precision air slide table • Bore sizes: 6, 8, 10, 12, 16 (mm) • Strokes: 5mm through 30mm depending upon bore size • With rubber or metal stopper or shock absorber • Variety of switches with a variety of wire lead lengths

Magneet:

N (w/o Magnet and Rail) · Magnet and Rail

Slaglengte:

10 mm · 30 mm · 20 mm · 15 mm

Boring:

8 mm · 16 mm · 10 mm · 12 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: 55-CXSL25-20

• Dual rod cylinder with ball bearing slide • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

20 mm · 80 mm · 100 mm

Boring:

25 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: 55-CXSM10-40

• Dual rod cylinder with slide bearing • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

75 mm · 40 mm · 25 mm · 80 mm

Boring:

25 mm · 10 mm · 15 mm · 20 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: 55-CXSWM20-10

• Dual rod cylinder: double rod • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

50 mm · 100 mm · 20 mm · 10 mm

Boring:

15 mm · 32 mm · 20 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CX2

SKU: CX2N10-50

Slaglengte:

150 mm · 25 mm · 50 mm · 200 mm

Boring:

15 mm · 10 mm · 25 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS2

SKU: CXS2M6-10

• Move high loads precisely – Double- rod construction ensures a force of up to 1126 N and non-rotating accuracy of ±0.1° • Adapt it to your application requirements – Strokes up to 200 mm and easily adjustable by tightening the hexagon nut • Achieve greater mounting and design flexibility – Cylinder body and workpiece can be easily mounted from different directions. 4 directions for mounting the cylinder body and 3 directions for mounting the workpiece.

Slaglengte:

70 mm · 80 mm · 175 mm · 60 mm

Boring:

6 mm · 10 mm · 32 mm · 20 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSL6-20R

• Dual rod cylinder with rod retracted side end lock and ball bearing slide • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

10 mm · 0 to – 5 mm compared to the standard stroke · 20 mm · 50 mm

Boring:

32 mm · 6 mm · 10 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSL25-10

• Dual rod cylinder with ball bearing slide • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

25 mm · 0 to – 5 mm compared to the standard stroke · 50mm · 60 mm

Boring:

25 mm · 25mm · 32 mm · 10 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSM6-10R

• Dual rod cylinder with rod retracted side end lock • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

10 mm · 0 to – 5 mm compared to the standard stroke · 40 mm · 30 mm

Boring:

6 mm · 10 mm · 20 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSM6M-30

• Dual rod cylinder with slide bearing • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

35 mm · 0 to –5mm compared to the standard stroke · 50 mm · 75mm

Boring:

25 mm · 32 mm · 25mm · 15 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSM20-20A

• Dual rod cylinder with air cushion • Slide bearing or ball bushing bearing • Bore sizes: 20mm, 25mm, 32mm • Standard strokes: 20-100mm • Thread types: M, Rc, NPT, G • Auto switches available

Slaglengte:

70 mm · 40 mm · 50 mm · 100mm

Boring:

25 mm · 32 mm · 25mm · 20 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSWL10-30

• Dual rod cylinder: double rod with ball bearing slide • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

100 mm · 0 to –10mm compared to the standard stroke (Extended end: 5mm; Retracted end: 5mm) · 50 mm · 30 mm

Boring:

20 mm · 32 mm · 10 mm · 25 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXS

SKU: CXSWM25-10

• Dual rod cylinder: double rod • Bore sizes: 6, 10, 15, 20, 25, 32 (mm) • Strokes from 10mm through 100mm depending upon bore size • Variety of switches and a variety of lead wire lengths

Slaglengte:

100 mm · 0 to –10mm compared to the standard stroke (Extended end: 5mm; Retracted end: 5mm) · 30 mm · 50 mm

Boring:

20 mm · 25 mm · 32 mm

Luchtcilinder Met Dubbele Zuigerstang

Serie: CXW

SKU: CXWM10-25

Slaglengte:

50 mm · 175 mm · 25 mm · 150 mm

Boring:

25 mm · 20 mm · 16 mm · 32 mm

Luchtcilinder Met Eindvergrendeling

SKU: CDBA2B40-400-HN

• CBA2, End lock cylinder • Bores: ø40, ø50, ø63, ø80, ø100 • Proof pressure: 1.5MPa • Cushion: interchangeable • Variety of mountings available • Auto switch capable

Magneet:

D (Built-in)

Slaglengte:

630 · 145 · 125 · 400

Boring:

40 mm · 100 mm · 50 mm · 63 mm

Luchtcilinder Met Eindvergrendeling

Serie: CA2

SKU: CDBA2B50-400-HN

• CBA2, End lock cylinder • Bores: ø40, ø50, ø63, ø80, ø100 • Proof pressure: 1.5MPa • Cushion: interchangeable • Variety of mountings available • Auto switch capable

Magneet:

D (Built-in)

Slaglengte:

400 · 100

Boring:

50 mm · 100 mm

Luchtcilinder Met Eindvergrendeling

Serie: CG1-Z

SKU: CDBG1FA50-600Z1-HN

• With end lock • Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80, 100 • Strokes up to 1500 mm.

Magneet:

D (Built-in Magnet)

Slaglengte:

600 · 400

Boring:

50mm

Luchtcilinder Met Eindvergrendeling

SKU: CDBG1GN40-100-HL

• End lock cylinder, CBG1 • Double acting, single rod • 7 mounting styles available • Bore sizes (mm): 20, 25, 32, 40, 50, 63, 80 and 100 • Rubber bumper or air cushion standard • Auto-switch capability

Magneet:

D (Built-in)

Slaglengte:

250 mm · 500 mm · 125 mm · 600 mm

Boring:

100 mm · 50 mm · 80 mm · 63 mm

Luchtcilinder Met Eindvergrendeling

SKU: CDBM2B20-300-HN

• End lock cylinder, CBM2 • Double acting, single rod • 8 mounting options available • Bore sizes: 20mm, 25mm, 32mm, 40mm • Auto switch capability

Magneet:

D (Built-in)

Slaglengte:

300 · 175 · 700 · 320

Boring:

20 mm · 40 mm · 25 mm · 32 mm

Luchtcilinder Met Vacuumaanvoer

Serie: ZCUK

SKU: ZCUKQ10-20D

Slaglengte:

50 mm · 10 mm · 15 mm · 30 mm

Boring:

20 mm · 10 mm · 25 mm · 16 mm

Magneet:

D (Built-in Magnet)